Titan Offroad recovery equipmentand our new TW series Winches

4x4 Off-Road gear

 3500LB ATV WINCH

    

                               $ 195.00

The  3500lb atv Winch is built to the same exacting standards as our fullsize recovery Winches . These compact heavy duty winches are sealed at both ends of the drum using twin lipped rubber seals on the electric motor and the gear housing as with smaller winches the motor is a permanent magnet . we also supply both a handle bar rocker switch and a wirelless keyfob remote that has a working distance of 50'.A mounting plate  and fairlead are supplied along with a 50' length of 3/16"winch line . The  3500lb winch has a fast line speed of 23.7fpm under no load and impressive numbers when under various loads  to get you moving again. this helps in a number of ways , on of them being less heat buildup and battery drain as you are spending less time winching  . Our 3500lb winch has one of the fastest speeds on the market today and even with just a few feet of line out you still have  close to 2000lbs pulling capacity.Some Manufacturers supply there Winches with less than 40' of line and there 4th layer pulling capacity is under a 1000lbs  and the amp draw is higher and speeds lower . The specs and pulling power / recovery speeds are listed below

THE WINCH COMES WITH A 1 YEAR WARRANTY AGAINST ANY MECHANICAL DEFECTS .

RATED LINE PULL   :   35000LBS SINGLE LINE

MOTOR                       :   12V 1.1HP PERMANENT MAGNET

CONTROL                  :   HANDLE BAR ROCKER SWITCH AND  WIRELLESS REMOTE

GEARTRAIN              :   3 STAGE PLANETARY

DRUM DIAMETER   :   1.77" X 3.19"

WEIGHT                     :   26.5LBS

BRAKE                      :   MCHANICAL

CABLE                      :  50' X 3/16"

FINISH                       :  GREY POWDER COAT

PERFORMANCE DATA

LINE PULL                   LINE SPEED                    AMP DRAW

LBS                                                    FPM                                                MOTOR

0                                                    23.7                                                     26

500                                               23.1                                                     35

1000                                             20.6                                                     70

1500                                            16.7                                                     98

2000                                            13.4                                                     107

2500                                            10.7                                                     129

3000                                            8.5                                                       138

3500                                            6.8                                                       169

PULLING POWER FOR THE 3500LB :  NOTE THE RATED PULL FOR ANY WHINCH IS WITH THE FIRST WRAPS ON THE DRUM.

PULLING POWER                                         WIRE ROPE LAYER

LBS                                                           1ST LAYER ON DRUM TO 5TH LAYER

3500                                                                 1ST LAYER

2,817                                                                2ND LAYER

2,573                                                                3RD LAYER

2,363                                                                4TH LAYER

1,975                                                                5TH LAYER

 

 

TW 3.5 ATV WINCH

YOU CAN SEE A VIDEO OF THE PARTS AND OPERATION FOR THIS WINCH  HERE

http://www.youtube.com/watch?v=_eABo3bQgz4

 

ATV  UTV 3500LB  WINCH

 YOU  CHOOSE EITHER STANDARD 3/16" X 50'-0" WIRE WINCH LINE 

OR UPGRADE TO 3/16"X50'-0" OF DYNEEMA 12STRAND SKF75.

 

SYNTHETIC WINCH LINE ON THE TW 3500LB WINCH

$260.00

 

TW3.5  WINCH $195.00 COMES WITH BOTH A ROCKER SWITCH AND WIRELESS REMOTE  AND ENOUGH HEAVY GUAGE CABLE TO MOUNT THE SOLENOID IN A SECURE DRY AREA .

.

3500 WINCH




 1.1hp Permanent magnet Motor with bearings not bushings and extra rubber seals added for

Seals for water resistance

gear box assembly also uses a twin lipped rubber seal



Steel gears are used in the 3500lb winch with a steel

Mechanical Brake



Wirelles remote control as well as the handle bar controller

are supplied with each Winch










 

Welcome

Recent Photos

 

Recent Forum Posts

Newest Members

Mattcharles000 

Featured Products