NEW FOR 2008 THE TITAN 10.000lb WINCH LOADED WITH BIG FEATURES FOR A LOW PRICE

We also have solenoid box relocation kits available for those wishing to relocate the box under the hood.

This new Model has superb weather proof components which are just not found in the economy brand winch lines found today.

Seals are used for both the motor and the gear casing assembly  . Even the screw holes for the motor are sealed , A heavy duty series wound  5.5hp bearing ( not bushing ) motor powers this unit and the 148.1 Gear Ratio offers a super fast no load line speed of 34.5' per minute puts this new TITAN winch in a class of its own when compared with the run of the mill Budget winches. Take a look at some of the features this new model features and we are sure you will have to agree with us that this is a lot of winch for a little money.

ALL TITAN WINCHES ARE NOW SUPPLIED WITH THE NEW TOTALLY SEALED SOLENOID . VISIT THE SOLENOID PAGE TO SEE THE SPECS.

The arrows point to all the the areas on the TITAN WINCH motor that have seals.

Bearing drive shaft on motor.

Here you can see the seals used for the gear box and motor and the assembled unit

Below are the Gears and Clutch Ring

The Sun Gear Shaft runs on the Bearing in the centre of the Gear casing.

.

The gear housing can be " clocked "so as to locate the freespool lever in any position.

                                           TITAN 10.000LB WINCH

                                                               $ 395.00

                                                                           THE FULL SPECS FOR THE TITAN 10.000 lb WINCH

Rated Line Pull	10000LBS (4536kgs) single line
Motor	5.5hp/4.0kw 12V 3.6hp/2.68kw 24V Series Wound
Control	Remote switch, 12ft(3.7m)lead
Gear train	3 Stage Planetary
Gear train ratio	148.2:1
Clutch	Sliding Ring Gear
Braking Action	Automatic In-The-Drum
Drum Size	ƒ³64mm�~L223.5mm
Cable	ƒ³8.3mm,28mm
Fairlead	4-Way Roller Fairlead
Remote Control	Included
Battery	Recommended:650CCA minimum for winching
Battery Leads	2 gauge,72"(183mm)
Finish	Dark gray powder coat
Overall Dimensions	21.1"�~6.3"�~8.6"(537mm�~160mm�~218mm)
Mounting Bolt Pattern	254mm�~114.3mm
Weight	N.W.37kg      G.W.39kg
Packing Size	57�~19�~34.5cm    1PC/CTN

10000LBS LINE SPEED AND AMP DRAW (FIRST LAYER) 12V

Line Pull	lbs	0	2000	4000	6000	8000	10000
	kg	0	907	1814	2721	3628	4536
Line Speed	ft/min	35.4	14.8	11.2	9.5	7.87	5.25
	m/min	10.8	4.5	3.4	2.9	2.4	1.6
Motor	Amps	75	180	220	290	360	450

10000LBS LINE PULL AND CABLE CAPACITY

Layers of cable		1	2	3	4
Rated line pull per layer	lbs	10000	7930	6566	5604
	kg	4536	3596	2977	2541
Cumulative cable capacity	ft	17	38.7	64.6	91.8
	m	5.2	11.8	19.7	28